FAQs & Troubleshooting
Popular |
166 Results
- 1How do I insert the bobbin case in the machine?
- 2How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 3How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 4How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 5How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 6How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 7How to use the Multi-purpose Screwdriver.
- 8How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 9How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 10How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 11How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 12How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 13How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 14The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 15Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
- 16How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 17How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 18Combination of fabric, thread and needle
- 19How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 20How do I create a space between characters?
- 21"Preventive maintenance is recommended" appears on the LCD.
- 22Why is there an extra needle plate supplied with my machine?
- 23"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 24"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 25"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 26"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 27Upper threading (Point)
- 28The bobbin thread cannot be pulled up.
- 29The machine does not make stitches
- 30How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 31How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 32"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 33How do I set the bobbin ?
- 34How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 35How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 36How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 37How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 38How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 39How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 40The stitch patterns cannot be selected.
- 41How do I recall a specific embroidery pattern from the computer?
- 42"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 43"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 44"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 45"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 46When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 47How do I clean the race?
- 48When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 49Embroidery
- 50"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?