FAQs & Troubleshooting
Popular |
Innov-is I /
Innov-is 6000D
166 Results
1.
How do I insert the bobbin case in the machine?
2.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
3.
How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
4.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
5.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
6.
How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
7.
How to use the Multi-purpose Screwdriver.
8.
How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
9.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
10.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
11.
How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
12.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
13.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
14.
The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
15.
Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
16.
How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
17.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
18.
Combination of fabric, thread and needle
19.
How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
20.
How do I create a space between characters?
21.
"Preventive maintenance is recommended" appears on the LCD.
22.
Why is there an extra needle plate supplied with my machine?
23.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
24.
"Raise the buttonhole lever." message appears on the LCD. What does it mean?
25.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
26.
"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
27.
Upper threading (Point)
28.
The bobbin thread cannot be pulled up.
29.
The machine does not make stitches
30.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]