FAQs & Troubleshooting
Popular |
EX-660
43 Results
1.
How do I sew buttonholes?
2.
An "E1" message appears on the panel.
3.
Incorrect thread tension
4.
Combination of fabric, thread and needle
5.
When thread got tangled.
6.
Fabric and Thread
7.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
8.
An "E4" message appears on the panel.
9.
An "E5" message appears on the panel.
10.
An "E3" message appears on the panel.
11.
An "E6" message appears on the panel.
12.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
13.
The machine does not make stitches
14.
Why does the lower thread keep breaking?
15.
The bobbin thread cannot be pulled up.
16.
How do I clean the machine? (Cleaning the race)
17.
It is difficult to pass the thread through the needle bar thread guide(hook).
18.
Place a spool of thread on a spool pin.
19.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
20.
Upper thread tightened up
21.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
22.
An "E2" message appears on the panel.
23.
Why does the upper thread keep breaking?
24.
How do I correctly install a bobbin?
25.
Where do I put the oil in my machine?
26.
How do I wind the bobbin?
27.
How do I thread my machine? (Threading the needle manually [without using the needle threader])
28.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
29.
Tangled thread on wrong side of fabric
30.
How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)