FAQs & Troubleshooting
Popular |
LB-6800
98 Results
31.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
32.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
33.
How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
34.
How do I manually thread the needle?
35.
How do I thread the machine (Threading the upper thread)?
36.
How do I wind the bobbin?
37.
It is difficult to pass the thread through the needle bar thread guide(hook).
38.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
39.
"Disconnect the foot controller." message appearing on the LCD. What does it mean?
40.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
41.
How do I clean the race?
42.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
43.
Why does the needle keep breaking?
44.
How do I sew buttonholes?
45.
Fabrics and stabilizer material for embroidery
46.
How do I thread the needle?
47.
With free-motion quilting, skipped stitches or needle breakage occur
48.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
49.
"Deleting..." message appearing on the LCD. What does it mean?
50.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
51.
"This pattern cannot be used." message appearing on the LCD. What does it mean?
52.
"OK to save the current settings?" message appearing on the LCD. What does it mean?
53.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
54.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
55.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
56.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
57.
"Selected a pattern." appears on the LCD.
58.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
59.
"Change to the single needle mode." appears on the LCD.
60.
"Lift the buttonhole lever." appears on the LCD.