FAQs & Troubleshooting
Popular |
CM250
299 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
Mat and Material Combinations
3.
Mat and Cutting Blade Combinations
4.
Adjusting the Blade Extension
5.
Downloading Optional Design Pattern Collection
6.
List of Error Messages for CanvasWorkspace (Others)
7.
How to Activate a Premium Function on CanvasWorkspace for PC [Video]
8.
Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
9.
E11008 appears on the computer screen.
10.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
11.
N12001 appears on the computer screen.
12.
What should I do if the scanned and cut positions are misaligned?
13.
E92002 appears on the computer screen.
14.
E12004 appears on the computer screen.
15.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
16.
Can I create the cutting data for ScanNCut from the image data?
17.
The machine is turned off (Auto Shut Down).
18.
Replacing the Blade
19.
Attaching & Peeling Off the Material
20.
The mat is fed in at an angle and is not fed during cutting / drawing.
21.
Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
22.
E10007 appears on the computer screen.
23.
E03005 appears on the computer screen.
24.
E03002 appears on the computer screen.
25.
What is the maximum area that the machine can scan?
26.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
27.
How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
28.
How do I Scan for Cutting (Direct Cut) ?
29.
Replacement Criteria
30.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.