FAQs & Troubleshooting
Popular |
Innov-is V7
149 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
How to use the Multi-purpose Screwdriver.
4.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
5.
Combination of fabric, thread and needle
6.
How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
7.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
8.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
9.
Why does the lower thread keep breaking?
10.
How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
11.
How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
12.
The bobbin thread cannot be pulled up.
13.
How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
14.
How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
15.
Fabric and Thread
16.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
17.
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
18.
How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
19.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
20.
Embroidery
21.
"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
22.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
23.
The machine does not make stitches
24.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
25.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
26.
How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
27.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
28.
How do I clean the race?
29.
When thread got tangled.
30.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?