FAQs & Troubleshooting
Popular |
Innov-is 1500D/1500
126 Results
1.
How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
2.
Why does the lower thread keep breaking?
3.
Fabric and Thread
4.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
5.
How do I remove the presser foot holder?
6.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
7.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
8.
It is difficult to pass the thread through the needle bar thread guide(hook).
9.
How to use the Multi-purpose Screwdriver.
10.
"Before embroidering, make sure embroidery frame is moved as far back as possible and the frame-securing lever is locked down. Then, press "Start/Stop" button to embroidery." message appearing on the LCD. What does it mean and how do I clear it?
11.
How do I sew a blind hem?
12.
How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
13.
How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
14.
How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
15.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
16.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
17.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
18.
How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
19.
How do I manually thread the needle?
20.
"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
21.
"Attach the embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
22.
"Remove the embroidery frame." message appears on the LCD. What does it mean?
23.
"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
24.
The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
25.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
26.
Place a spool of thread on a spool pin.
27.
"This button cannot be used if the embroidery unit is attached." message appearing on the LCD. What does it mean and how do I clear it?
28.
"No more than 12 patterns can be used. Reduce the number of patterns used." message appearing on the LCD. What does it mean and how do I clear it?
29.
"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
30.
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?