FAQs & Troubleshooting
Popular |
FAX-878
39 Results
1.
How do I replace the ribbon?
2.
"DOCUMENT JAM" error appears on the LCD. What should I do?
3.
Can an External Answering Device(TAD) be used instead of the built-in one?
4.
How do I connect an External Telephone?
5.
What does "NG" on the Transmission Verification Report mean?
6.
Can I reduce the size of a received fax on this machine?
7.
How do I clean the print head?
8.
How do I set up a answering machine (TAD) to work on the same line as the fax?
9.
What does the pseudo-ring (double ring) indicate in the F/T Mode?
10.
What is Distinctive Ring and how do I program it?
11.
Why are my sent faxes always received with a black vertical line down the page?
12.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
13.
I have an external telephone answering device on the same line as my FAX and have the answer mode on my FAX set for TAD mode. How do I know if an incoming call is a telephone (voice) call or a fax?
14.
Can I connect my External Answering Device in another room and still receive faxes?
15.
How do I improve the copy or fax quality?
16.
My FAX/MFC will not Dial. Why?
17.
Can I print a report that will show a listing of faxes I sent and received?
18.
I am experiencing problems sending a fax, what can I do?
19.
How do I clean the Scanner to improve the copy or fax quality?
20.
I have a telephone answering device (TAD) on the same line as my FAX. Is necessary to record a 5 second pause before my outgoing message begins?
21.
I have an external telephone answering device (TAD) connected to my FAX, have the answer mode set for TAD and the Ring Delay set to zero. Why does my answering machine still pick up when receiving a fax call?
22.
Why can't I copy or send? All the keys just beep 3 times.
23.
I have my FAX machine set in the FAX/TEL (F/T) answer mode. What happens if I do not answer the telephone and it's a non fax call?
24.
How can I clear the "PAPER JAM" error message?
25.
How do I print the received faxes that are stored in memory? (Fax Storage)
26.
How do I know which receive mode to select?
27.
Vertical streaks appear in my copies.
28.
"UNABLE TO..." or "MEMORY DISABLED" message appearing on the LCD. What does it mean and how do I clear it?
29.
Do I need a telephone line to send and receive faxes with my Brother machine?
30.
How does the "FAX/TEL" Mode work?