FAQs & Troubleshooting
Popular |
Innov-is V7
149 Results
31.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
32.
Why does the lower thread keep breaking?
33.
How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
34.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
35.
How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
36.
How do I specify the stitchiing width and stitch position using the sensor pen?
37.
About Sensor Function Area
38.
How do I change the needle ?
39.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
40.
How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
41.
How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
42.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
43.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
44.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
45.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
46.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
47.
The thread tension is incorrect.
48.
"Preventive maintenance is recommended" appears on the LCD.
49.
Embroidery
50.
How do I specify the sewing end point with the sensor pen for utility stitches?
51.
"This key cannot be used at this time." message appears on the LCD. What does it mean?
52.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
53.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
54.
How to specify the Guideline Marker Position With the Sensor Pen
55.
How do I calibrate the sensor pen?
56.
How do I attach or remove the embroidery frame ?
57.
How do I attach or remove the Embroidery Unit?
58.
How do I attach the Embroidery foot “W+” with LED pointer or “W”?
59.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
60.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?