FAQs & Troubleshooting
Popular |
Innov-is 90E
35 Results
1.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
2.
Where do I put the oil in my machine?
3.
How do I clean the race?
4.
Embroidery
5.
It is difficult to pass the thread through the needle bar thread guide(hook).
6.
How do I retrieve a specific embroidery pattern from the computer?
7.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
8.
Place a spool of thread on a spool pin.
9.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
10.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
11.
Why does the lower thread keep breaking?
12.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
13.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
14.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
15.
Why is the outline sewing off the pattern?
16.
Fabrics and stabilizer material for embroidery
17.
"Deleting..." message appearing on the LCD. What does it mean?
18.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
19.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
20.
Upper threading (Point)
21.
How do I save often-used patterns in the machine's memory?
22.
"Lower the presser foot lever." appears on the LCD.
23.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
24.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
25.
How do I select patterns from the embroidery cards (sold separately)?
26.
How do I correctly install a bobbin?
27.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
28.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
29.
"The safety device has been activated." appears on the LCD.
30.
When thread got tangled.