MFC-6800
 |
FAQs & Troubleshooting |
MFC-6800
Date: 08/24/2006 ID: faq00000299_000
How do I program the date and time?
To set the date and time, follow the instructions listed below:
-
Press the Menu/Set key on the Control Panel.
-
Press the up or down navigation key and select General Setup, then Date/Time.
-
The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 03 for 2003).
-
Press the Menu/Set key.
-
The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
-
Press the Menu/Set key.
-
The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
-
Press the Menu/Set key.
-
The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
-
Press the Menu/Set key.
-
Press the Stop/Exit key on the Control Panel.
The LCD will display the date and time whenever the unit is idle.
DCP-1000, FAX-1800C, FAX-2800, FAX-2900, FAX-3800, MFC-3100C, MFC-3200C, MFC-4420C, MFC-4800, MFC-4820C, MFC-5100C, MFC-5200C, MFC-6800
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.