Due to the construction of the tape mechanism, the one inch (25mm) piece of tape that is produced prior to every label cannot be eliminated. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.

The following methods are useful for reducing tape use:

• Method 1 - Selecting "Small Margin" in the Cut Option setting:
  
  
  1. Press the [Label] key .
     
     
  2. Press the arrow key or to select "Cut Option".
     
     
  3. Press the arrow key or   to select "Small Margin".
     
     
  4. Press [OK] key  or [Enter] key .
  
  This eliminates the margin at the end of the tape after printing as shown below:
  
  
  
  
  
• Method 2 - Printing several labels at once by using the "Copies" or "Numbering" function:
  
  
  1. Press the [Label] key .
     
     
  2. Press the arrow key or to select "Cut Option".
     
     
  3. Press the arrow key  or  to select "Small Margin".
  4. Press [OK] key  or [Enter] key .
     
     
  5. While holding down the [Shift] key , press the [Print] key to display the Copies screen.
     
     
  6. Select "Copies" or "Numbering" using the arrow  or  key.
     
     
  7. Press [OK] key  or [Enter] key  and select the number of copies to be printed using the arrow  or  key, or type the number using the number keys.
  8. Press [OK] key  or [Enter] key .

  
  

  
  This eliminates the margin of the subsequent labels as shown below:
  
  
  
  
  
• Method 3 - Printing different labels continuously:
  
  
  1. Press the [Label] key .
     
     
  2. Select the "Cut Option" menu.
     
     
  3. Select "Chain".
     
     
  4. Press [OK] key  or [Enter] key .
     
     
  5. Enter the text.
     
     
  6. Press the [Print] key .
     
     
  7. Repeat step 5 and 6 until all labels have been created.
     
     
  8. After the last label is printed, hold down the [Shift] key  and press the [Feed&Cut] key  to finally cut the labels.
  
  An example of the labels: