FAQs & Troubleshooting
Popular |
149 Results
- 1Combination of fabric, thread and needle
- 2How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 3How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 4How to use the Multi-purpose Screwdriver.
- 5How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 6How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 7How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 8When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 9How do I thread my machine ?
- 10When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 11How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 12How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 13How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 14Where do I put the oil in my machine?
- 15How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 16"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 17When thread got tangled.
- 18Fabric and Thread
- 19How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 20The machine does not make stitches
- 21How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 22How do I remove or attach the presser foot holder?
- 23How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 24How do I change the volume of operation sounds or alarm sounds?
- 25About Sensor Function Area
- 26How do I attach or remove the embroidery frame ?
- 27How do I set the bobbin ?
- 28How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 29How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 30How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 31How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 32How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 33How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 34How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 35How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 36How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 37How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 38How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 39How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 40How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 41How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 42How do I wind the bobbin?
- 43How do I clean the race?
- 44When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 45The thread tension is incorrect.
- 46Why is the outline sewing off the pattern?
- 47For better results when sewing stretch fabrics
- 48How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 49How do I specify the sewing end point with the sensor pen for utility stitches?
- 50"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?