FAQs & Troubleshooting
Popular |
68 Results
- 1How to use the Multi-purpose Screwdriver.
- 2"This USB media cannot be used." message appears on the LCD. What does it mean?
- 3Where do I put the oil in my machine?
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 6How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 7When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 8How do I attach or remove the Embroidery Unit?
- 9"Preventive maintenance is recommended" appears on the LCD.
- 10When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 11Embroidery
- 12How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 13"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 14When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 15How do I clean the race?
- 16If the thread breaks during sewing.
- 17"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 18"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 19"Failed to save file." message appears on the LCD. What does it mean?
- 20How do I change the volume of operation sounds or alarm sounds?
- 21How do I change the needle ?
- 22How do I set the bobbin ?
- 23"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 24"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 25How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 26Upper threading (Point)
- 27When thread got tangled.
- 28How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 29"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 30"Set the clock." message appears on the LCD. What does it mean?
- 31"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 32How do I remove or attach the Embroidery foot ?
- 33How do I thread my machine ?
- 34How do I wind the bobbin?
- 35"USB media error" message appears on the LCD. What does it mean?
- 36"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 37Fabrics and stabilizer material for embroidery
- 38"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 39"Sensor module error." message appears on the LCD. What does it mean?
- 40How do I attach or remove the embroidery frame ?
- 41How do I adjust the clock on the display?
- 42"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 43"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 44"Transmitting by USB" message appears on the LCD. What does it mean?
- 45"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 46"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 47Why is the outline sewing off the pattern?
- 48Why does the lower thread keep breaking?
- 49"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 50"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?