FAQs & Troubleshooting
Popular |
139 Results
- 1How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 2How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 3How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 4How do I recall a specific embroidery pattern from the computer?
- 5How to use the Multi-purpose Screwdriver.
- 6When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 7When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 8How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 9How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 10When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 11Combination of fabric, thread and needle
- 12"Turn off the power and replace the needle plate." message appearing on the LCD. What does it mean and how do I clear it?
- 13How can I speed the transfer rate up to retrieve embroidery patterns from the USB flash drive?
- 14"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 15How do I clean the race?
- 16Embroidery
- 17How do I save often-used patterns in the machine's memory?
- 18"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 19How do I correctly install a bobbin?
- 20How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 21How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 22Where do I put the oil in my machine?
- 23The stitch patterns cannot be selected.
- 24"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?
- 25How do I raise or lower the feed dogs?
- 26How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 27How do I thread my machine using the Automatic Threading Button?
- 28Why does the lower thread keep breaking?
- 29When thread got tangled.
- 30Fabric and Thread
- 31How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 32How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 33How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 34For better results when sewing stretch fabrics
- 35How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 36How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 37How do I manually thread my machine?
- 38It is difficult to pass the thread through the needle bar thread guide(hook).
- 39How do I create a space between characters?
- 40"USB media is not loaded. Load USB media." message appearing on the LCD. What does it mean and how do I clear it?
- 41"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
- 42"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 43"Change to the large, or extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 44"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 45"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
- 46"Select a pattern." message appears on the LCD. What does it mean?
- 47How do I remove the presser foot holder?
- 48How do I confirm Windows98SE?
- 49The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 50Can I get some movies or illustrations on the machine LCD to get how to thread the machine, change presser feet, wind the bobbin, etc?