FAQs & Troubleshooting
Popular |
33 Results
- 1How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 2Free-arm sewing (removing bed extension)
- 3Threading the left needle
- 4How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 5How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 6Differential feed adjustment
- 7How to attach and remove the presser foot
- 8How to remove and install the needle
- 9Needle
- 10Oiling
- 11Retracting knife
- 12Threads break
- 13Preparation before threading
- 14Adjusting the thread tension dials
- 15How to set the thread change assembly (Two-thread sewing)
- 16To secure chains
- 17How to use the thread spool cap
- 18How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 19How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 20Adjusting the presser foot pressure
- 21Using the wide table
- 22Cleaning
- 23If threads break during sewing
- 24Sewing Materials, Threads and Needles Comparison Chart
- 25Fabric is puckered
- 26Stitches are not uniform
- 27Skipped stitches
- 28Needles break
- 29The fabric does not feed through.
- 30Threading the right needle
- 31Threading the upper looper
- 32Threading the lower looper
- 33THREADING