FAQs & Troubleshooting
Popular |
99 Results
- 51How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 52Where do I put the oil in my machine?
- 53How do I save often-used patterns in the machine's memory?
- 54How do I manually thread the needle?
- 55How do I thread the machine (Threading the upper thread)?
- 56How do I wind the bobbin?
- 57"Lower the presser foot lever." appears on the LCD.
- 58It is difficult to pass the thread through the needle bar thread guide(hook).
- 59When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 60"Deleting..." message appearing on the LCD. What does it mean?
- 61"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 62"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 63"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 64"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 65"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 66"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 67"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 68"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 69"Saving..." message appearing on the LCD. What does it mean?
- 70"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 71"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 72"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 73"Selected a pattern." appears on the LCD.
- 74"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 75"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 76"Change to the single needle mode." appears on the LCD.
- 77"Lower the buttonhole lever." appears on the LCD.
- 78"Lift the buttonhole lever." appears on the LCD.
- 79"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 80"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 81"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 82"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 83"The safety device has been activated." appears on the LCD.
- 84How do I remove the presser foot holder?
- 85How do I confirm Windows98SE?
- 86When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 87Why does my thread keep jamming?
- 88The thread tension is incorrect.
- 89Why does the upper thread keep breaking?
- 90Why is the outline sewing off the pattern?
- 91How do I sew an applique?
- 92How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 93How do I sew a blind hem?
- 94Why does the lower thread keep breaking?
- 95Fabrics and stabilizer material for embroidery
- 96Upper threading (Point)
- 97Place a spool of thread on a spool pin.
- 98When thread got tangled.
- 99Fabric and Thread