FAQs & Troubleshooting
Popular |
42 Results
- 1How do I wind the bobbin?
- 2Combination of fabric, thread and needle
- 3Where do I put the oil in my machine?
- 4How do I sew buttonholes?
- 5How do I sew a blind hem?
- 6Upper Threading (Using the twin needle)
- 7How do I manually thread the needle?
- 8When should I use the extra spool pin?
- 9"The safety device has been activated." appears on the LCD.
- 10The thread tension is incorrect.
- 11Why does the upper thread keep breaking?
- 12Why does the lower thread keep breaking?
- 13The thread is looping when I try to wind a bobbin.
- 14Place a spool of thread on a spool pin.
- 15How do I correctly install a bobbin?
- 16How do I thread the needle?
- 17"Delete the selected pattern." message appearing on the LCD. What does it mean?
- 18"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 19How do I sew an applique?
- 20How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 21How do I sew such as vinyl, leather, quilting layers and velvet?
- 22"Lower the presser foot lever." appears on the LCD.
- 23It is difficult to pass the thread through the needle bar thread guide(hook).
- 24When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 25"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 26"Press needle position button to raise needle." appears on the LCD.
- 27"Lift the buttonhole lever." appears on the LCD.
- 28Why does the needle keep breaking?
- 29When thread got tangled.
- 30How to I attach the spool of thread to my machine?
- 31"Can not change." message appearing on the LCD. What does it mean?
- 32"Lower the buttonhole lever." appears on the LCD.
- 33"Disconnect the foot control." appears on the LCD.
- 34"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 35"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 36Why does my thread keep jamming?
- 37How do I load the spool into the thread cassette?
- 38"Saving..." message appearing on the LCD. What does it mean?
- 39"Change to the single needle mode." appears on the LCD.
- 40"Insert thread cassette." message appearing on the LCD. What does it mean?
- 41How do I remove the presser foot holder?
- 42Fabric and Thread