FAQs & Troubleshooting
Popular |
149 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3Combination of fabric, thread and needle
- 4How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 5How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 6How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 7How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 8How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 9How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 10How do I clean the race?
- 11When thread got tangled.
- 12"Transmitting by USB" message appears on the LCD. What does it mean?
- 13How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 14How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 15How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 16"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 17"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 18How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 19How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 20How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 21How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 22"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 23When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 24How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 25"Failed to save file." message appears on the LCD. What does it mean?
- 26How do I change the needle ?
- 27"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 28How do I sew an applique?
- 29Why does the lower thread keep breaking?
- 30Fabric and Thread
- 31When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 32How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 33The machine does not make stitches
- 34How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 35How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 36If the thread breaks during sewing.
- 37"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 38"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- 39How do I attach or remove the Embroidery Unit?
- 40How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 41"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 42The thread tension is incorrect.
- 43Embroidery
- 44How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 45"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 46"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 47How do I specify the stitchiing width and stitch position using the sensor pen?
- 48About Sensor Function Area
- 49How do I adjust the clock on the display?
- 50How do I wind the bobbin?