FAQs & Troubleshooting
Popular |
139 Results
- 1How to use the Multi-purpose Screwdriver.
- 2Combination of fabric, thread and needle
- 3When thread got tangled.
- 4Why does the lower thread keep breaking?
- 5Fabric and Thread
- 6Where do I put the oil in my machine?
- 7How do I create a space between characters?
- 8How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 9Embroidery
- 10How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 11How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 12When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 13How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 14How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 15How do I remove the presser foot holder?
- 16When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 17The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 18Can I get some movies or illustrations on the machine LCD to get how to thread the machine, change presser feet, wind the bobbin, etc?
- 19How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 20How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 21How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 22How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 23How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 24How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 25The stitch patterns cannot be selected.
- 26It is difficult to pass the thread through the needle bar thread guide(hook).
- 27"USB media is not loaded. Load USB media." message appearing on the LCD. What does it mean and how do I clear it?
- 28"Preventive maintenance is recommended" appears on the LCD.
- 29"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 30How do I recall a specific embroidery pattern from USB media?
- 31How do I sew an applique?
- 32How do I correctly install a bobbin?
- 33How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 34How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 35How do I recall a specific embroidery pattern from the computer?
- 36When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 37How do I clean the race?
- 38Place a spool of thread on a spool pin.
- 39"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?
- 40"Turn off the power and replace the needle plate." message appearing on the LCD. What does it mean and how do I clear it?
- 41"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 42"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
- 43"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 44"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 45"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
- 46"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 47How do I confirm Windows98SE?
- 48How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 49"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 50How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]