FAQs & Troubleshooting
Popular |
94 Results
- 1How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 2How to use the the versatile magnetic frame [Video instructions]
- 3How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 4How to set up the cap frame. [Video instructions]
- 5How to Embroider on Clothes. [Video instructions]
- 6How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 7How to Embroider on Cap. [Video instructions]
- 8How to use the Round frame (PRPRFK1) [Video instructions]
- 9How to set up the cap frame driver. [Video instructions]
- 10How to Embroider on Bag. [Video instructions]
- 11How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 12How to Embroider on Pet Collar. [Video instructions]
- 13There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 14Maintenance (Clean the hook) [ Video ]
- 15How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 16How to Embroider on Shoes. [Video instructions]
- 17Maintenance (Oiling the machine) [ Video ]
- 18Embroidery
- 19"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 20How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 21Maintenance (Cleaning the bobbin case) [ Video ]
- 22Maintenance (Cleaning around the needle plate) [ Video ]
- 23Fabric and Thread
- 24How do I install the bobbin wound with thread?
- 25When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 26Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 27Maintenance (Oiling the machine)
- 28How do I thread the machine? (Threading the upper thread)
- 29"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 30Maintenance (Cleaning the bobbin case)
- 31When thread got tangled
- 32"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 33How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 34Maintenance (Clean the hook)
- 35Stabilizers (Backing)
- 36"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 37"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 38"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 39"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 40Maintenance (Cleaning the thread paths of the upper threads)
- 41Hooping the Fabric
- 42"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 43"This USB media cannot be used." message appears on the LCD. What does it mean?
- 44"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 45"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 46Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 47"Needle bar case home position error." message appears on the LCD. What does it mean?
- 48Fabric/stabilizer compatibility chart
- 49"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 50"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?