FAQs & Troubleshooting
Popular |
94 Results
- 1How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 2How to set up the cap frame driver. [Video instructions]
- 3How to Embroider on Pet Collar. [Video instructions]
- 4How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 5How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 6How to set up the cap frame. [Video instructions]
- 7How to Embroider on Bag. [Video instructions]
- 8Maintenance (Cleaning around the needle plate) [ Video ]
- 9Maintenance (Clean the hook) [ Video ]
- 10How to use the Round frame (PRPRFK1) [Video instructions]
- 11How to Embroider on Clothes. [Video instructions]
- 12How to Embroider on Cap. [Video instructions]
- 13How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 14Maintenance (Oiling the machine) [ Video ]
- 15Maintenance (Cleaning the bobbin case) [ Video ]
- 16How to use the the versatile magnetic frame [Video instructions]
- 17How to Embroider on Shoes. [Video instructions]
- 18Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 19How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 20How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 21Embroidery
- 22How do I install the bobbin wound with thread?
- 23"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 24How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 25How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 26Maintenance (Clean the hook)
- 27Fabric and Thread
- 28"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 29Maintenance (Cleaning the bobbin case)
- 30"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 31Stabilizers (Backing)
- 32Hooping the Fabric
- 33There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 34"This pattern cannot be used." message appears on the LCD. What does it mean?
- 35"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 36"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 37"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 38"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 39Maintenance (Oiling the machine)
- 40Maintenance (Cleaning the thread paths of the upper threads)
- 41Maintenance (Cleaning around the needle plate)
- 42"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 43"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 44"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 45"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 46"Picker error" message appears on the LCD. What does it mean?
- 47How do I thread the machine? (Threading the upper thread)
- 48"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 49"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 50"Can't use this key during camera mode." message appears on the LCD. What does it mean?