Which interface cable can I use?

The following interfaces can be used with your printer.

For Windows users:

USB cable
Use the enclosed interface cable.
RS-232C cable
Do not use an interface cable that is longer than 6 feet. (2.0 meters)
Network cable
Use a straight - through Category5 (or greater) twisted - pair cable for 10BASE - T or 100 BASE - TX FAST Ethernet Network.

For Mac users:

USB cable
Use the enclosed interface cable.
Network cable
Use a straight - through Category5 (or greater) twisted - pair cable for 10BASE - T or 100 BASE - TX FAST Ethernet Network.

It is not possible to connect RS-232C cable and USB cable to the printer at the same time and use it.

The RS-232C serial connector part of this equipment is not Limited Power Source.

FAQs & Troubleshooting