QL-1060N

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I reset network setting?

[QL-580N] [QL-1060N]

 

  • To reset network setting and turn APIPA ON

     

    1. Press the ON/OFF button to switch the machine OFF.
    2. Hold down the ON/OFF button for two seconds.
    3. Continue holding down the ON/OFF button, and press the CUT button twice.
    All the network settings will be reset.
  • To reset network setting and turn APIPA OFF

     

    1. Press the ON/OFF button to switch the machine OFF.
    2. Hold down the ON/OFF button for two seconds.
    3. Continue holding down the ON/OFF button, and press the CUT button four times.
    All the network settings will be reset.

APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.1.0 to169.254.254.255.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

QL-1060N, QL-580N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.