HL-2170W

FAQs & Troubleshooting

FAQs & Troubleshooting

"Clean Corona Wire" message continues to appear on the PC screen, even though I have cleaned the corona wire of the drum unit.

"Clean Corona Wire" message appears at certain times to maintain the best print quality.

 

Check to see if the Toner LED is on.

 

 

If the Toner LED is on:

Check to see if the drum unit assembly is installed correctly. If not, take the drum unit out of the machine and put it back in.

 

If the drum unit assembly is correctly installed, and still the Toner LED is on, the toner cartridge is empty. Replace the toner cartridge with a new one. Click here to learn how to replace the toner cartridge.

 

If still the Toner LED is on after replacing the toner cartridge,refer to the Related FAQs at the end of the page.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2140, HL-2150N, HL-2170W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.