Innov-is Ie

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I insert the bobbin case in the machine?

  • Be sure to unplug the machine before you replace the bobbin case in it. Otherwise, electric shock or injury may result.
  • Be sure that the bobbin case is correctly installed. Otherwise, the needle may break.
  • Never use a bobbin case that is scratched; otherwise, the upper thread may become tangled, the needle may break, or sewing performance may suffer.
    For a new bobbin case (part code: XC3153-251 (green marking on the screw), XC8167-451 (no color on the screw)), contact your nearest authorized dealer or service center.
  • If the needle plate has been removed it is especially important to reinstall the needle plate and tighten the screws prior to installing the bobbin case.
 

 

Insert the bobbin case so that the projection on the bobbin case aligns with the spring.

 

How to insert the bobbin case in the machine

1 Projection          2 Spring

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is I / Innov-is 6000D, Innov-is Ie

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.