HL-1470N
 |
FAQs & Troubleshooting |
What kind of memory can I use?
The memory can be expanded up to 36 Mbytes by installing a commercially available single in-line memory modules (SIMM). When you want to expand the memory, you need to remove the fitted SIMM and then install a new SIMM of at least 8 Mbytes.
<Minimum memory recommendations>
For HL-1450 (Including 8 Mbytes of internal memory)
HP LaserJet, EPSON FX-850, and IBM Proprinter XL emulation modes
|
300 dpi |
600 dpi |
1200 dpi | |
|
Letter / A4 |
Standard |
Standard |
16 Mbytes |
|
Legal |
Standard |
Standard |
16 Mbytes |
PostScript Level II language emulation mode
|
300 dpi |
600 dpi |
1200 dpi | |
|
Letter / A4 |
Standard |
Standard |
16 Mbytes |
|
Legal |
Standard |
Standard |
16 Mbytes |
For HL-1470N (Including 8 Mbytes of internal memory)
HP LaserJet, EPSON FX-850, and IBM Proprinter XL emulation modes
|
300 dpi |
600 dpi |
1200 dpi | |
|
Letter / A4 |
Standard |
Standard |
16 Mbytes |
|
Legal |
Standard |
Standard |
16 Mbytes |
PostScript Level II language emulation mode
|
300 dpi |
600 dpi |
1200 dpi | |
|
Letter / A4 |
Standard |
Standard |
16 Mbytes |
|
Legal |
Standard |
Standard |
16 Mbytes |
The SIMM with the following specifications can be installed:
|
Speed |
60 nsec to 80 nsec |
|
Pin type |
72 pin |
|
Height |
25.4 mm(1.00") or less |
|
Output |
32 bit or 36 bit |
- The printer has only one slot for a SIMM upgrade. If you want to increase your printed memory again after you have already installed a SIMM module in the slot, you will need to remove the previously installed SIMM.
- Addtional memory is useful and may be necessary if you are using the Page Protection function.
- (For HL-1470N users) You have to expand the printer memory by adding a SIMM to use the FTP/IPP protocol.
Content Feedback
To help us improve our support, please provide your feedback below.
