MFC-665CW

FAQs & Troubleshooting

FAQs & Troubleshooting

Whenever anyone attempts to leave a message, all they hear are funny sounds and eventually a high pitched squeal. Why is this happening?

The problem is that the Message Center or Digital TAD unit is in the F/T mode and not the Message Center or TAD mode. The F/T mode will not allow any voice messages to be recorded.You must set up Message Center or Digital TAD in the following order:


<STEP1> How to setup Message Center or Digital TAD:

You must set up Message Center or Digital TAD in the following order:

  1. Record Message Center or TAD Outgoing Message.
  2. Press and hold Message Center or Digital TAD key  until it lights to activate the Message Center or TAD mode.

<STEP2> Recording Message Center or TAD Outgoing Message:

Recording the Message Center or TAD Outgoing Message is the first step you need to follow before you can turn on the Message Center or Digital TAD. Make sure your OGM is less than 20 seconds long.

  1. Press the Menu key on the Control Panel.

  2. Press the up or down arrow key until Fax appears and press OK.

  3. Press the up or down arrow key until Setup Msg Ctr or Setup TAD appears and press OK.

  4. Press the up or down arrow key until OGM appears and press OK.

  5. Press the up or down arrow key until Msg Ctr OGM or TAD Message appears and press OK.

  6. Press the up or down arrow key until Record OGM. or Record MSG. and press OK.

  7. Pick up the handset to record a message.
    For example: Hello. We are unable to take your call at this time. Please leave a message after the signal. If you wish to send a fax, please press  5 1, wait for fax tones, then press the Start button.

  8. Replace the handset. The Message Center or Digital TAD will play your OGM.

  9. Press Stop/Exit.

This is the only setting you can select if you want to turn the Message Center or Digital TAD on.

<STEP3> Activating Message Center or TAD Mode:

Press and hold the Message Center or Digital TAD key until the button lights and the screen displays MC:Msg Ctr or TAD:MsgMgr. When Message Center or Digital TAD light is out, the Message Center or Digital TAD is off.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-665CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.