Error Messages (LCD, PC) or LED Lights - Troubleshooting

Error Message on LCD

• I still receive the error message "Paper Jam" after I removed the jammed paper.
• When I attempt to turn my Brother machine off, the LCD displays "All Related Fax Data Will Be Deleted".
• When I install ink cartridges in my machine, the LCD displays "Install Starter Ink".
• Out of Fax Memory
• The LCD message "Standing by ON/OFF to resume " is displayed on my Brother machine.
• Why does the message "No Response/Busy" appear on my Transmission Verification Report?
• Unable to Scan AX
• Unable to Print 7X
• Unable to Print 5X
• Ink Absorber NearFull
• Ink Absorber Full
• Unable to Print 3X
• Low Temperature
• High Temperature
• Unable to Print XX
• No Ink Cartridge
• Ink Low
• How do I clear the message "Cannot Detect" from the display?
• Why does the message "Media is Full" appear on the LCD when I put a memory card into the media slot on my Brother machine? How can I clear it?
• Why does the message "No File" appear on the LCD when I put a memory card into the media slot on my Brother machine?
• No Paper Fed
• Wrong Paper Size
• Cover is Open
• Why does my machine's LCD show "NO CARTRIDGE" even though I have already installed all the ink cartridges?
• Document Jam
• I'm using Windows® XP and I'm trying to use the Scan key on the Control Panel.  The LCD says "Connecting to PC" but nothing happens.
• Why does the message "Media Error" appear on the LCD when I put a memory card into the media slot on my Brother machine? How can I clear it?
• Paper Jam
• Out of Memory
• Replace Ink
• When scanning a document to be copied or faxed, the LCD shows "Out of Memory."
• Clear the message "Awaiting Redial"
• What does "COMM.ERROR" on the LCD display mean?

Error Message on PC Display

• When installing the Macintosh OS X printer driver it displays a message that you need to type your password to install this software.
• The message "xxxxxxx.xxx can't be opened because it is from an unidentified developer." appears on OS X v10.8.x. (where xxxxxxx.xxx is the file name.)
• The error message "IS052 InstallNetworkDriver" appears when installing the MFL-Pro Suite from the CD-ROM or the Full Driver & Software Package is downloaded from the "Download" section.
• The Error message "A file required cannot be found.(CC035)" appears when I click "Remote Setup" or "Quick-Dial" button from ControlCenter2. (For Macintosh)
• The error message "Invalid format for short nick name" appears when printing a document. (Mac OS® X 10.5 or greater)
• I'm using Windows® 8. I insert the CD-ROM supplied with my machine into my PC's CD-ROM drive, but the error message "This CD does not contain drivers for your computer operating system." appears.
• When I try to install the MFL-Pro Suite from the CD-ROM, the error "An error occurred during the installation... IS031-CreateFaxRxDataFolder - x" appears and I cannot continue the installation.
• When I try to scan to OCR I get an error message saying "This feature is not available because there is no OCR Software installed".
• I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X)
• When I start the Remote Setup Software, the error message "RS 005-xx" or "RS 006-xx" appears on the display.
• I receive an error message stating "USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it" when I connect the Brother machine to a computer.
• I'm using Windows Vista® or later and a network connected Brother machine. The following errors "Error - Sent to Printer", "Sent to Printer" or "Deleting - Printing" appear in the PC Print Queue.
• When I try to install the MFL-Pro Suite from the CD-ROM, the error dialogue appears and I cannot continue installing the MFL-Pro Suite.  The error says "Install the latest Windows® Service Pack and try again".
• I configured the "IP Config" method of the machine to "Auto" to assign an IP address automatically, however it was changed to "Static" unexpectedly. I get an error message that indicates IP address is not unique, or a document is printed out by the machine I didn't expected.
• When I run the Firmware update tool or the I-FAX install tool, the "Program failed to run" message appears on my PC screen. What do I do?
• I receive an error message when trying to use network functions.(For Windows®)
• I get an error "Print Queue is stopped". (Mac OS X 10.5 or greater)
• I get an error "Print Queue is stopped". (Mac OS X 10.2 - 10.4)
• My Antivirus Software gives a warning message during the installation of Web BRAdmin.
• The error message "The MFL Pro Software is already installed! To reinstall, please uninstall the software first then run this installation program again" appears. (For Windows®)

Error Message on Status Monitor

• "Offline" appears on the Status Monitor. (For Windows®)
• I still receive the error message "Paper Jam" after I removed the jammed paper.
• Out of Fax Memory
• Unable to Scan AX
• Unable to Print 7X
• Unable to Print 5X
• Ink Absorber NearFull
• Ink Absorber Full
• Unable to Print 3X
• Low Temperature
• High Temperature
• Unable to Print XX
• No Ink Cartridge
• Ink Low
• No Paper Fed
• Wrong Paper Size
• Cover is Open
• Document Jam
• Paper Jam
• Out of Memory
• Replace Ink