Using the control panel, web browser on the BRAdmin Professional software or TELNET to enable the IPv6 protocol

1. Printer control panel (machines with LCD panel)
   Select "NETWORK" => "TCP/IP" => "IPv6=ON" =>
   Turn the printer OFF and then ON
   
   
2. EWS (Web Based Management)
   Network Configuration => Configure TCP/IP => Configure IPv6 =>
   Select "Enable" => "Submit" => Turn the printer OFF and then ON
   
   
   
3. BRAdmin
   TCP/IP => Configure IPv6 => Select "Enable" => "OK" =>
   Turn the printer OFF and then ON
   
   
   
4. TELNET
   Type in "set ip v6 enable" => "exit" => Turn the printer OFF and then ON