Date:11/08/2007 ID:faqp000117_000




Title:
The tape does not feed properly or the tape gets stuck inside the machine.

Description:
Please check the followings :



  • Please check that the end of the tape feeds under the tape guide. If the tape is out of the guide, it will feed out in the wrong direction. You can reinsert the tape under the tape guide as follows:




  • Please check the installation of the Cutter unit (two yellow plastic parts). There should be a gap about 1/16" inch between them for the tape to feed out. If the Cutter unit is blocking the tape coming out, try removing the Cutter unit and reinstalling it back into the machine. The Cutter unit should go straight down into the machine, so, do not twist the cutter when pushing it into the machine.




  • Try another cassette tape.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

PT-1180

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear