Home > USA/ Canada/ Latin America > Others >
CS-8060 > FAQs & Troubleshooting > Preparation > faqh000457_000
When threading the upper thread, carefully follow the instructions.
If the upper threading is not correct, the thread may become tangled or the needle may bend or break.
The order for threading the thread cassette is indicated on the thread cassette.
Also check the markings on the thread cassette while threading it.
Check that the sewing machine is turned on. If the sewing machine is turned off, the thread cassette will not be ejected correctly.
Check that the thread unwinds from the left as described above.
Close until it clicks.
When using special thread such as metallic thread, use the thumb of your left hand to lightly press down on the area indicated in the illustration to create an opening that allows for easier threading.
Be sure the thread is cut as described above,otherwise the needle threader cannot be used to thread the needle.
CS-80, CS-8060, CS-8150, HE-120, Innov-is 500D, SE-270D
Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.
Site Map |
Global Brother |
Copyright © Brother Industries, Ltd. All Rights Reserved.