Date:04/07/2009 ID:faqh000379_000




Title:
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.

Description:

Please check the Bobbin Winder.

If the Bobbin Winder shaft is moved to the right position (bobbin winding mode), the needle will not move. 

Please return the Bobbin Winder shaft to the left position and press the Start-Stop Button or Foot Control to start the machine in the sewing mode.
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

BB370, BM-2700, BM2800, BM-3600, BM3700, BM3850, CE-5000/5000PRW, CE-5500/5500PRW/5500T, CE7070PRW, CE8080/CE8080PRW, CP-6500, CP-7500, CS-100T/4000/5000H, CS5055PRW, CS-6000/ b/ t/ i, CS-80, CS-8060, CS-8072, CS-8150, ES-2000/2000T, EX-660, HC1850, HE-120, HE-240, HS-2000, HS-2500, HS-3000, Innov-is 1000, Innov-is 1200, Innov-is 500D, Innov-is 1250D, Innov-is 40, Innov-is 80, Innov-is 900D, Innov-is 950D, LB-6800, LS2250PRW, LS-1217, LS-1520, LS-1717, LS-2020, LS-2125/2125i/2129, LS2300PRW, LS2350, LS-30, LS-590, LX-3125/3125E, NX-200, NX-400Q/400, NX-600, PC-210/210PRW, PC-420/420PRW, PC-6500, PE-150V, PE-170D, PE-180D, PE-300S, PE-430, PE-450, PE500, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, PS-21, PS-3100/3700, SB170, SB3129, SB530T, SB700T, SB7050E, SC6600, SC9500, SE-270D, SE-350, SE-400, SQ-9000, XB2500, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL3700, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700, XL-6452, XL-6562, XM3700, XR4040, XR1300, XR-52C, XR53, XR6060, XR-65T, XR-7700, XR-9000, XR9500PRW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear