Date:02/26/2009 ID:faqh000200_000




Title:
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appearing on the LCD.

What does it mean and how do I clear it?

Description:
This message is displayed when the motor locks up due to tangled thread or for other reasons related to thread delivery.

 

 

 

Note

If the operation procedure was correct, the machine will beep once.

If the operation procedure was incorrect, the machine will beep twice or four times.

To turn the alarm on or off, press .
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

Innov-is 1500D/1500, Innov-is 2500D, Innov-is 4000D/4000, Innov-is 2800D, Innov-is 4500D, Innov-is 4750D, Innov-is 5000, Innov-is 6000D, Innov-is 6700D, NX-2000, QC-1000

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear