Date:04/07/2009 ID:faqh000091_001




Title:
How do I remove the presser foot holder?

Description:

  1. Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
    With models equipped with needle position button(needle position button), raise the needle by pressing needle position button(needle position button) once or twice.
    turn the handwheel

    or

    		 press needle position button

    1 Mark

    2 Needle position button
  2. Turn off the sewing machine.
    Turn off the sewing machine.

    Caution

    Before replacing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if a button is accidentally pressed and the machine starts sewing.

  3. Raise the presser foot lever. The presser foot is raised.
    Raise the presser foot lever. 1 Presser foot lever
  4. Press the black button at the back of the presser foot holder.
    The presser foot holder releases the presser foot.
    Press the black button. 1 Black button

    2 Presser foot holder
  5. Use the screwdriver to loosen the presser foot holder screw.
    The presser foot is removed from the presser bar.
    Use the screwdriver to loosen the presser foot holder screw. 1 Screwdriver

    2 Presser foot holder

    3 Presser foot holder screw

    4 Presser bar
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

BM-2700, BM-3600, CE-5000/5000PRW, CS-100T/4000/5000H, CS-6000/ b/ t/ i, CS-80, CS-8060, CS-8072, CS-8150, ES-2000/2000T, EX-660, HE-120, HE-240, HS-2000, HS-3000, Innov-is 1000, Innov-is 1200, Innov-is 500D, Innov-is 1250D, Innov-is 40, Innov-is 80, Innov-is 900D, Innov-is 950D, LB-6800, LS2250PRW, LS-1217, LS-1520, LS-1717, LS-2020, LS-2125/2125i/2129, LS2300PRW, LS2350, LS-30, LS-590, LX-3125/3125E, NX-200, NX-250, NX-400Q/400, NX-450/450Q, NX-600, NX-650Q, NX-800, PC-210/210PRW, PC-420/420PRW, PC-6500, PC-8500/8500D, PE-300S, PS-21, PS-3100/3700, SB3129, SB700T, SE-270D, SE-350, SE-400, SQ-9000, ULT, XL-2600/2600i/2610, XL-3500/ t/ i/3510/3520, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700, XL-6452, XL-6562, XR-52C, XR-65T, XR-7700, XR-9000, XR9500PRW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear