Date:04/07/2009 ID:faqh000009_000




Title:
Embroidery

Description:
  • Problem that occurs most in embroidery is misalignment of pattern.
    This is caused mostly because a fabric is loose when it's set into an embroidery frame.
    Make sure to set a fabric tightly into an embroidery frame so that you may hear a drum-like sound if you tap the set fabric lightly.

  • Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
    Prepare a stabilizer material that is larger than an embroidery frame to be used.
    Make sure to attach right surface of stabilizer material to a fabric securely by using an iron.
    Fabric 1 Fusible side of stabilizer

    2 Fabric(wrong side)
  • Use Brother embroidery threads and needle 75/11 for embroidery.


If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HE-120, HE-240, Innov-is 1000, Innov-is 1200, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 4000D/4000, Innov-is 500D, Innov-is 1250D, Innov-is 2800D, Innov-is 4500D, Innov-is 4750D, Innov-is 5000, Innov-is 6000D, Innov-is 6700D, Innov-is 900D, Innov-is 950D, Innov-is BP2100, Innov-is VE2200, Innov-is VM6200D, LB-6800, PC-6500, PC-8500/8500D, PE-150V, PE-170D, PE-180D, PE-300S, PE-430, PE-450, PE500, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, PE-DESIGN Ver.8, SB7050E, SE-270D, SE-350, SE-400, ULT

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear