Date:04/07/2009 ID:faqh000003_000




Title:
When thread got tangled.

Description:
  • When a machine stops operation due to tangled thread, do not turn the pulley by force.
    If the pulley is turned by force then, lower thread might not be picked up correctly and stitches might not be formed correctly.

  • If threads get tangled, remove a needle plate and cut the tangled threads by scissors or cutter.
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

BB370, BM-2700, BM2800, BM-3600, BM3700, BM3850, CE-5000/5000PRW, CE-5500/5500PRW/5500T, CE7070PRW, CE8080/CE8080PRW, CP-6500, CP-7500, CS-100T/4000/5000H, CS5055PRW, CS-6000/ b/ t/ i, CS-80, CS-8060, CS-8072, CS-8150, ES-2000/2000T, EX-660, HC1850, HE-120, HE-240, HS-2000, HS-2500, HS-3000, Innov-is 1000, Innov-is 1200, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 4000D/4000, Innov-is 500D, Innov-is 1250D, Innov-is 2800D, Innov-is 40, Innov-is 4500D, Innov-is 4750D, Innov-is 5000, Innov-is 6000D, Innov-is 6700D, Innov-is 80, Innov-is 900D, Innov-is 950D, Innov-is BP2100, Innov-is VE2200, Innov-is VM6200D, Innov-is VQ3000, LB-6800, LS2250PRW, LS-1217, LS-1520, LS-1717, LS-2020, LS-2125/2125i/2129, LS2300PRW, LS2350, LS-30, LS-590, LX-3125/3125E, NX-200, NX-2000, NX-250, NX-400Q/400, NX-450/450Q, NX-600, NX-650Q, NX-800, PC-210/210PRW, PC-420/420PRW, PC-6500, PC-8500/8500D, PE-150V, PE-170D, PE-180D, PE-300S, PE-430, PE-450, PE500, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, PQ-1500/1500S, PS-21, PS-3100/3700, QC-1000, SB3129, SB530T, SB700T, SB7050E, SC6600, SC9500, SE-270D, SE-350, SE-400, SQ-9000, ULT, XB2500, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL3700, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700, XL-6452, XL-6562, XM3700, XR4040, XR1300, XR-52C, XR53, XR6060, XR-65T, XR-7700, XR-9000, XR9500PRW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear