The message "No Paper Fed" may appear on the display if the Brother machine is out of paper, the paper is not loaded properly in the paper tray or the jam clear cover located in the back of the machine is not installed properly.
To resolve this issue follow the steps below:
[Check] Verify the paper is loaded properly in the paper tray.
If the paper is loaded NOT properly in the tray, insert the paper into the tray by following the procedure below:
- Remove the paper tray from the machine.
Adjust the Paper Side Guides, located on either side of the tray to fit the width of the paper you are using. The guides should just barely make contact with the paper edges.
- Adjust the Paper Length Guide to the size of paper you are using. The pointer on the Paper Length Guide should line up with the indicator mark for the paper size.