Date:08/24/2006 ID:faq000461_002




Title:

How do I print a Test page?

Description:

Using control panel button:

  1. Turn off the printer.
  2. Make sure that the front cover is closed and the power cord is plugged in.
  3. Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and Paper LEDs are off.
  4. Press the Go button again. The printer will print a Test page.

 

 

 

 

Using the printer driver:

 

If you are using Brother's Windows® printer driver, click the Print Test Page button. It is in the General tab of the Windows® printer driver.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-2030, HL-2040, HL-2070N

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear