Date:04/24/2008 ID:faq000402_002




Title:
The printer cannot print full pages of a document. An error message PRINT OVERRUN appears.

Description:

Please do the following:

 
  • Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
  • Reduce the complexity of your document or lower the print resolution.
  • Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program.

 

  • Change the following settings in the Windows® printer driver, and then try again. The best combination of the settings below will vary depending on your document:
    +Graphics mode
    +TrueType mode
    +Use printer TrueTypeR fonts
    To change these settings, click 'Advanced' tab of the printer driver. Select 'Manual' in the 'Print Setting' section. Click 'Setting...'.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-5280DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear