Date:11/09/2010 ID:faq000306_009




Title:

Jam MP Tray

Description:

If the LCD shows Jam MP Tray, follow these steps:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.


  1. Remove the paper from the MP tray.

  2. Remove any jammed paper from in and around the MP tray.

    Image

  3. Fan the paper stack, and then put it back in the MP tray.

    Image

  4. When loading paper in the MP tray, make sure that the paper stays under the maximum paper height guides (1) on both sides of the tray.

    Image

  5. Press Black (Mono) Start or Color (Colour) Start to resume printing.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

MFC-9460CDN, MFC-9560CDW, MFC-9970CDW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear