Date:01/08/2013 ID:faq000027_011




Title:

How do I know the current network configuration?

Description:

You can print the Network Configuration page by the following steps:


  1. Press Menu or Menu/Set on the control panel.
  2. Press Up or Down arrow/navigation key until Print Reports appears and press OK, Menu/Set or Set.
  3. Press Up or Downarrow/navigation key until Network Config appears and press OK, Menu/Set or Set.
  4. Press Black (Mono) Start or Color (Colour) Start. The network configuration page will be printed and you can see the current network configuration of your Brother machine.

Note

If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-110C, DCP-540CN, DCP-7020, DCP-8060, FAX-1920CN, FAX-1940CN, MFC-210C, MFC-3240C, MFC-3320CN, MFC-3340CN, MFC-3820CN, MFC-420CN, MFC-440CN, MFC-465CN, MFC-5440CN, MFC-5460CN, MFC-5840CN, MFC-5860CN, MFC-620CN, MFC-640CW, MFC-665CW, MFC-685CW, MFC-7220, MFC-7225N, MFC-7420, MFC-7820N, MFC-820CW, MFC-845CW, MFC-8460N, MFC-8660DN, MFC-8670DN, MFC-885CW, MFC-8860DN, MFC-8870DW, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9840CDW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear