Date:03/30/2012 ID:faqp001492_001




Title:
How to connect to a DC power outlet (Optional)

Description:

Connect the printer to your vehicle's 12 V DC power outlet (cigarette lighter, etc.) to power the printer or charge the rechargeable battery using the vehicle's DC power.

  1. Connect the DC cable to the vehicle's 12V DC power outlet.

  2. Connect the DC cable to the printer.

  3. Turn on the vehicle’s power, and then press and hold the on/off button(Power) button of the printer to turn it on.

DC outlet 1 DC cable



 

Note

  • The DC cable is an optional accessory.
  • The voltage supplied by a vehicle fluctuates. The printing speed may differ depending on the supplied voltage.


 

 
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

RJ-4030, RJ-4040

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear