Date:02/14/2008 ID:faqp000941_000




Title:

How can I minimize the tape margin?

Description:
  1. Continue pressing the function key until "Margin" is displayed.
  2. Press the OK key.
  3. Press the cursor key until "Narrow" is displayed.
  4. Press the OK key to apply the setting.
  5. Press the OK key.
  6. Cut along the dots " : " with scissors so that the text is centered in the label. (1/6" = 4mm)

Note

    The one inch (25mm) piece of tape that is produced prior to every label cannot be eliminated due to the construction of the tape mechanism. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.

    The following methods are useful for reducing tape use:

    • Using the "Numbering function" - please refer to "How to use Numbering function"

    • Setting the tape margin to "Chain Print" - please make sure that you press the feed button after the last label is printed, otherwise a part of the text may be cut off.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

PT-1830, PT-1880

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear