Date:05/29/2012 ID:faqp000403_001




Title:

How do I create a Banner Label using DK-2205 or similar? (P-touch Editor 5.0 for Windows)

Description:
Create a banner using "White Continuous Length Paper Tape 2-3/7" (62mm)" (DK-2205).


  1. Insert the DK roll

    Image

    Insert the "White Continuous Length Paper Tape 2-3/7 (62 mm)" into your QL printer.
  1. Select the Tape settings

    Start up P-touch Editor and create a new label layout. Click Image to show the Paper Property bar. Check if that 2-3/7" (62mm) is selected. You can also set the length, margins, and the orientation here.

    <Using Express mode as an example>
    Image


  1. Add clip art to the banner

    Click on [Insert] - [Picture] - [Clip Art,,,].

    Image

    The Clip Art Gallery dialog box appears. Select a piece of clip art and click the OK button.

    Image


  1. Enter the text

    Click Image on the Command bar to create a text box, and then enter the text.

    Image


  1. Print the label

    Click Image to print the label.

    Completed label
    Image

    Peel the printed label from backing and apply the label.

If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

QL-1050/1050N, QL-1060N, QL-500, QL-550, QL-570, QL-570VM, QL-650TD, QL-700, QL-710W, QL-720NW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear