Home > USA/ Canada/ Latin America > United States >
NX-800 > FAQs & Troubleshooting > Preparation > faqh000466_000
With the twin needle, you can sew two parallel lines of the same stitch with two different threads,both upper threads should have the same thickness and quality. Be sure to use the twin needle and the extra spool pin .
Install the twin needle.
Thread the upper thread for the left needle eye.
Manually thread the left needle with the upper thread.
Pass the thread through the eye of the needle from the front.
The needle threader cannot be used with the twin needle.
If the needle threader is used with the twin needle, the sewing machine may be damaged.
Insert the extra spool pin onto the bobbin winder shaft.
Insert the extra spool pin so that it is perpendicular to the bobbin winder shaft.
Swing down the spool pin so that it is horizontal.
Place the upper thread spool for the needle on the right side onto the extra spool pin, and then secure it with the spool cap.
The thread should unroll from the top front of the spool.
Thread the upper thread for the right side in the same way that the upper thread for the left side was threaded.
Without passing the thread through the needle bar thread guide, manually thread the right needle.
Attach zigzag foot "J".
When using the twin needle, be sure to attach zigzag foot "J".
If bunched stitches occur, use presser foot "N" or attach stabilizer material.
Turn on the sewing machine and select a stitch.
When using the pintuck foot (sold separately) to sew straight pintucks with the twin needle, select the stitch with the center needle position.
Two lines of stitching are sewn parallel to each other.
Innov-is 1000, Innov-is 1200, Innov-is 1250D, NX-200, NX-250, NX-400Q/400, NX-450/450Q, NX-600, NX-650Q, NX-800, PC-210/210PRW, PC-420/420PRW, SB3129
Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.
Site Map |
Local Web Site |
Global Brother |
Copyright © Brother Industries, Ltd. All Rights Reserved.