Date:04/07/2009 ID:faqh000405_000




Title:
"Lower the presser foot lever." appears on the LCD.

Description:

This message appears when the start/stop button, reverse/reinforcement stitch button, thread cutter button or the foot controller is pressed while the presser foot lever is raised.


 

 

Note

  • Proper operation will sound
    One beep
  • Improper(wrong) operation will sound
    Two or four beeps
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

CS-8150, HE1, HE-120, HE-240, Innov-is 1000, Innov-is 1200, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 500D, Innov-is 1250D, Innov-is 2800D, Innov-is 900D, Innov-is 950D, LB6770/6770PRW, LB-6800, NX-2000, NX-400Q/400, NX-450/450Q, NX-600, NX-650Q, NX-800, PC-420/420PRW, PC-6500, PE-150V, PE-170D, PE-180D, PE500, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, QC-1000, SB3129, SE-270D, SE-350, SE-400, ULT

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear