Date:02/26/2009 ID:faqh000220_000




Title:
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appearing on the LCD.

What does it mean and how do I clear it?

Description:

This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame.

You can rotate the pattern 90 degrees and continue combining characters.


 

 

 

Note

If the operation procedure was correct, the machine will beep once.

If the operation procedure was incorrect, the machine will beep twice or four times.

To turn the alarm on or off, press .
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

Innov-is 1500D/1500, Innov-is 2500D, Innov-is 4000D/4000, Innov-is 2800D, Innov-is 4500D, Innov-is 4750D, Innov-is 5000, Innov-is 6000D, Innov-is 6700D, ULT

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear