Date:11/20/2012 ID:faqh000025_000




Title:
The thread tension is incorrect.

Description:
There could be several reasons why the tension won't set on the machine.
  • Check the machine is threaded correctly. Rethread the machine according to the instructions in the manual.
    Refer to "Upper threading" of  "Preparation" category.

  • Check the upper thread tension set.

  • Remove the bobbin and make sure it is threaded properly in the shuttle race.
    Refer to "Correctly installing a bobbin. " of  "Preparation" category.

  • If there is any loose thread or lint in the bobbin case, please clean them with the included cleaning brush.
    Refer to "Cleaning the Bobbin Case"  of  "General Information" category.

  • Check if the combination of needle size, thread size and fabric is incorrect. Be sure to use the correct needle and thread size for the fabric you are sewing.
    (Example: Denim-size 16 needle and 40-50 heavy duty thread)
    Refer to " Combination of fabric, thread and needle " of  "General Information" category.
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

BB370, BM-2700, BM2800, BM-3600, BM3700, BM3850, CE-5000/5000PRW, CE-5500/5500PRW/5500T, CE7070PRW, CE8080/CE8080PRW, CP-6500, CP-7500, CS-100T/4000/5000H, CS5055PRW, CS-6000/ b/ t/ i, CS-80, CS-8060, CS-8072, CS-8150, ES-2000/2000T, EX-660, HC1850, HE-120, HE-240, HS-2000, HS-2500, HS-3000, Innov-is 1000, Innov-is 1200, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 4000D/4000, Innov-is 500D, Innov-is 1250D, Innov-is 2800D, Innov-is 40, Innov-is 4500D, Innov-is 4750D, Innov-is 5000, Innov-is 6000D, Innov-is 6700D, Innov-is 80, Innov-is 900D, Innov-is 950D, Innov-is VM6200D, Innov-is VQ3000, LB6770/6770PRW, LB-6800, LS2250PRW, LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS2300PRW, LS2350, LS-30, LS-590, LX2500, LX-3125/3125E, NX-200, NX-2000, NX-250, NX-400Q/400, NX-450/450Q, NX-600, NX-650Q, NX-800, PC-210/210PRW, PC-420/420PRW, PC-6500, PC-8500/8500D, PE-300S, PQ-1500/1500S, PS-21, PS-3100/3700, QC-1000, SB170, SB3129, SB530T, SB700T, SC6600, SC9500, SE-270D, SE-350, SE-400, SQ-9000, SQ9050, ULT, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL3700, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700, XL-6452, XL-6562, XM3700, XR4040, XR1300, XR-52C, XR53, XR6060, XR-65T, XR-7700, XR-9000, XR9500PRW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear