Date:05/25/2011 ID:faq002805_000




Title:
Connection : Failed (Error : TS-08) on the WLAN report

Description:

The error code TS-08 means two or more WLAN access points/routers that have WPS or AOSS™ enabled are detected.

Error code on WLAN report

  • It is likely that another WLAN access point/router near you is activating WPS or AOSS™. Try starting again after a few minutes in order to avoid interference from other access points/routers.

  • Confirm that only one WLAN access point/router within range has the WPS or AOSS™ method active and try again.

  • If there are other WLAN access points/routers in your neighborhood, set your WLAN access point/router at a channel different from others' ones (Recommended: more than five channels) to avoid interference.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

MFC-8810DW, DCP-J140W, HL-2270DW, HL-2275DW, HL-2280DW, HL-3140CW, HL-3170CDW, HL-4570CDW, HL-4570CDWT, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT, HL-S7000DN, MFC-7860DW, MFC-8710DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT, MFC-9130CW, MFC-9330CDW, MFC-9340CDW, MFC-9560CDW, MFC-9970CDW, MFC-J265W, MFC-J270W, MFC-J280W, MFC-J410W, MFC-J415W, MFC-J425W, MFC-J430W, MFC-J4310DW, MFC-J435W, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW, MFC-J4710DW, MFC-J5910DW, MFC-J615W, MFC-J625DW, MFC-J630W, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW, MFC-J835DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear